bat·365(中文)官方网站-登录入口

新闻信息

通知公告

bat365官网登录入口新闻

学术信息

公司产品

首页

通知公告

正文

钢与组合结构研究进展国际论坛

International Workshop on Advances in Steel and Composite Structures

钢与组合结构研究进展国际论坛

bat365在线登录网站 bat365官网登录入口

论坛主席 Richard Liew 院士

逸夫图书馆五楼报告厅

2015年12月8日9:30am ~ 4:00pm

Professor Leroy Gardner

Department of Civil & Environmental Engineering

Imperial College London

London

SW7 2AZ, UK

Email: Leroy.gardner@imperial.ac.uk

Title:

STAINLESS STEEL STRUCTURES: RESEARCH AND DESIGN

（不锈钢结构理论研究与设计）

Biography:

Leroy Gardner is a Professor of Structural Engineering in the Department of Civil and Environmental Engineering at Imperial College London. He is engaged in teaching at both undergraduate and postgraduate level, specialist advisory work and leading an active research group in the area of steel structures.

His principal research interests, in respect of which he has co-authored over 250 papers, as well as numerous textbooks and design guides, lie in structural testing, numerical modelling and the development of design guidance. He has contributed to the provisions of several international structural design standards and chairs the BSI mirror group responsible for UK input into the Eurocode for steel structures.

Professor Gardner is a Fellow of the Institutions of Civil (FICE) and Structural (FIStructE) Engineers, and is actively involved in both. For IStructE, he is Chair of the North Thames Regional Group and the Research Panel, and a Member of Council and a number of other panels and committees. He is a member of the editorial board of five international structural engineering journals, as well as being Editor-in-Chief of the International Journal of Steel Structures and the research journal of the Institution of Structural Engineers

Professor Dennis Lam

Chair in Structural Engineering

Director of Bradford Centre for Sustainable Environments

Faculty of Engineering & Informatics

University of Bradford

Bradford BD7 1DP, UK

Email: d.lam1@bradford.ac.uk

Title:

Demountable Composite Structures for Whole Life-Cycle

Structural Engineering

（可装拆式组合结构的全寿命周期结构行为）

Biography:

Professor DENNIS Lam is the Chair of Structural Engineering in the School of Engineering and Director of Bradford Centre for Sustainable Environments at the University of Bradford, UK. He was also formerly Chief Structural Engineer for the City of Wakefield. He is a Chartered Engineer, Fellow of the Institution of Structural Engineers and Member of the Institution of Civil Engineers. Before joining the academia, he had spent more than ten years in engineering practices. He is currently a Guest Chair Professor at the Tsinghua University, China and Adjunct Professor at the Hong Kong Polytechnic University. He is the European Editor-in-Chief for Steel & Composite Structures and serves on the editorial boards for six other international journals in structural engineering. He chairs the Working Group of the European Standard Committee, CEN/T250/SC4 responsible for the systematic review and revision of the Eurocode 4.

Professor Richard Liew

Department of Civil & Environmental Engineering

National University of Singapore

E1A-07-03, 1 Engineering Drive 2

Singapore 117576

Email: ceeljy@nus.edu.sg

Title:

DESIGN AND CONSTRUCTION OF COMPLEX AND

USUAL STEEL STRUCTURES

（复杂与超常钢结构设计）

Biography:

Richard Liew is a Professor and the Program Director of Hazard, Risk and Mitigation in the Department of Civil & Environmental Engineering at the National University of Singapore. The main focus of his research is on the development of sustainable metal-composite technologies for offshore, marine and infrastructural works. These investigations have ranged from technologies for prefabrication production of steel structures for high-rise and large span systems at one extreme to design for fire hazards and extreme loadings for structures in marine and defence related industries at the other end of the spectrum. Arising from this work, he has co-authored 5 books and generated more than 300 technical publications. He is an editorial board member of 8 journals. He interacts closely with the industry in the Asia Pacific region serving as an expert and technical advisor. He chairs numerous international and local committees related to standards and specifications of steel and composite structures. He is a registered professional engineer in Singapore, an ASEAN chartered professional engineer and a Chartered Engineer in the United Kingdom. He is a Chartered Engineer in UK, a Professional Engineer in Singapore, an ASEAN Chartered Professional Engineer, a Fellow of the Academy of Engineering Singapore, a Honorary Fellow and the Past President of Singapore Structural Steel Society and Honorary Fellow of Hong Kong Institute of Steel Construction.

Dr. Wang Junyan

Department of Material Science & Engineering

Tongji University

1239, Siping Road

Shanghai, China 200092

Email: 14529@tongji.edu.cn

Title:

Ultra-high performance cementitious composites: from materials properties to structural application

（超高性能水泥基结构材料——从材料性能到结构应用）

Biography:

王俊颜，现任同济大学高等研究院特聘研究员、博士生导师。2010年在同济大学材料科学与工程学院获得工学博士学位，2009年赴加拿大英属哥伦比亚大学作访问学者，2010年1月至2014年12月在新加坡国立大学任项目研究员（Research Fellow）。

2014年，王俊颜博士入选同济大学基础学科高水平领航人才计划，任特聘研究员，作为负责人建设超高性能水泥基材料实验室和研究课题组。王俊颜博士的研究领域为超高性能水泥基结构材料，包括超轻、超强、超高韧性三大方向，目前已经在Cement and Concrete Research、Cement and Concrete Composites、ACI materials journal、Construction and Building Materials等水泥混凝土研究领域的国际顶级期刊发表十余篇SCI收录论文，并长期担任美国土木工程师学会（ASCE）、美国混凝土协会（ACI）旗下学术期刊审稿人。

Dr. Wang Tongyun

Applied Research Consultants Pte. Ltd.

1 Soon Lee Steet, #04-28 Pioneer Centre

Singapore 627605

Email: wty@arcsg.com

Title:

New Trends of Applications of Advanced Numerical Analyses for Steel and Composite Structures in Singapore

(新加坡钢结构及组合结构的高等分析进展)

Biography:

WANG Tongyun obtained his PhD from National University of Singapore for his works on steel-concrete interfacial behavior using cohesive zone method. Earlier he obtained Master of Engineering from NUS working on genetic algorithm and post-buckling and Bachelor of Engineering from Chongqing University. He has been working as Research Engineer and Research Fellow for more than 10 years and on over 5 jointly funded research projects including high strength steel-concrete composite columns for sustainable construction, novel steel-concrete-steel sandwich panel, CFRP composite pipe subjected to impact, multi-function facade, and ultra-high performance cementitious material for composite decking. He has one provisional US patent on SCS composite system. Dr. Wang is the co-founder of Applied Research Consultants Pte. Ltd. in Singapore and now acting as director of the company with experiences for various structural analyses, nonlinear FEA, blast effect analysis, blast-resistant design and CFD based wind study for complex roof structures. He has been appointed by Siemens Oil & Gas headquarter as FEA trainer. He has provided consulting services to many international and regional companies, including Petronas, Siemens, Emerson, Taisei, CPG, TTJ, Technics, PEC, Rotary etc. for infrastructures and Oil & Gas plants. He also served Singapore authorities including Singapore Ministry of Home Affairs and Singapore Ministry of Foreign Affairs for security related projects.

Dr. Xiong Mingxiang

Research Fellow

Department of Civil and Environmental Engineering

National University of Singapore

Singapore 117576

Email: ceexm@nus.edu.sg

Title:

Experimental Study And Fire Resistant Design Of Concrete Filled Steel Tubular Columns With High Strength Materials

（高性能钢管混凝土柱的试验研究及抗火设计）

Biography:

XIONG Mingxiang is currently a Research Fellow in National University of Singapore (NUS). He was a Research Scholar with NUS pursing his doctorate degree since 2008, and he was conferred with doctorate in 2013. He has been involved in composite structure research and design for more than 12 years. His research interests include steel-concrete composite structure subjected to static and extreme environmental loads, such as fire, impact and blast etc. He has authored/co-authored more than 10 journal papers; and the co-author for Singapore code of practice “BC4:2015 Design Guide for Concrete Filled Tubular Members with High Strength Materials - An extension of Eurocode 4 Method to C90/105 Concrete and S550 Steel”.

Assoc. Professor Yan Jia-Bao

School of Civil Engineering, Tianjin University

Key Laboratory of Coastal Civil Engineering Structure and Safety

Tianjin University, Tianjin 300072, China

Email: ceeyanj@163.com

Title:

Novel Steel-Concrete-Steel sandwich structure

– From research to applications

（新型钢-砼-钢夹芯板的研究及应用）

Biography:

YAN Jia-Bao is an Associate Professor in the School of Civil Engineering at the Tianjin University, China. Before joining this University, he received his Ph.D degree from the National University of Singapore, and spent four more years to continue his research as a research fellow at the same university. His research mainly focused on the development of sustainable novel steel-concrete composite structures for civil and offshore constructions, and developing the corresponding design guidelines for the engineering application purposes by means of experiments and nonlinear numerical analysis. His extensive research interests also include the developments of high performance steel structure, steel-concrete composite structure, and reinforced concrete structure by using high performance concrete and high strength steel. He has published about forty papers in international peer reviewed journals and conferences, and has served as the reviewers for nearly ten peer reviewed journals.

Dr. Huang Zhenyu

Department of Civil & Environmental Engineering

National University of Singapore

E1A-02-18, 1 Engineering Drive 2

Singapore 117576

Email: zhenyu_huang@nus.edu.sg

Title:

STRUCTURAL BEHAVIOUR OF NOVEL STEEL-CONCRETE-STEEL

SANDWICH COMPOSITE WALLS

(新型三明治夹心墙的结构性能)

Biography:

HUANG Zhenyu is a research fellow in the Department of Civil & Environmental Engineering at the National University of Singapore. The main focus of his research is on the development of novel steel-concrete-steel sandwich composite structures infilled with ultra-lightweight cement composite for offshore, marine and infrastructural works.

欢迎广大师生参加！

All interested are welcome!

地址：中国江苏省南京市江北新区浦珠南路30号
邮编：211800 电话：025-58139488

扫一扫关注“bat365在线登录网站嘉木之音”

	Professor Leroy Gardner Department of Civil & Environmental Engineering Imperial College London London SW7 2AZ, UK Email: Leroy.gardner@imperial.ac.uk
Title:	STAINLESS STEEL STRUCTURES: RESEARCH AND DESIGN （不锈钢结构理论研究与设计）
Biography:	Leroy Gardner is a Professor of Structural Engineering in the Department of Civil and Environmental Engineering at Imperial College London. He is engaged in teaching at both undergraduate and postgraduate level, specialist advisory work and leading an active research group in the area of steel structures. His principal research interests, in respect of which he has co-authored over 250 papers, as well as numerous textbooks and design guides, lie in structural testing, numerical modelling and the development of design guidance. He has contributed to the provisions of several international structural design standards and chairs the BSI mirror group responsible for UK input into the Eurocode for steel structures. Professor Gardner is a Fellow of the Institutions of Civil (FICE) and Structural (FIStructE) Engineers, and is actively involved in both. For IStructE, he is Chair of the North Thames Regional Group and the Research Panel, and a Member of Council and a number of other panels and committees. He is a member of the editorial board of five international structural engineering journals, as well as being Editor-in-Chief of the International Journal of Steel Structures and the research journal of the Institution of Structural Engineers
	Professor Dennis Lam Chair in Structural Engineering Director of Bradford Centre for Sustainable Environments Faculty of Engineering & Informatics University of Bradford Bradford BD7 1DP, UK Email: d.lam1@bradford.ac.uk
Title:	Demountable Composite Structures for Whole Life-Cycle Structural Engineering （可装拆式组合结构的全寿命周期结构行为）
Biography:	Professor DENNIS Lam is the Chair of Structural Engineering in the School of Engineering and Director of Bradford Centre for Sustainable Environments at the University of Bradford, UK. He was also formerly Chief Structural Engineer for the City of Wakefield. He is a Chartered Engineer, Fellow of the Institution of Structural Engineers and Member of the Institution of Civil Engineers. Before joining the academia, he had spent more than ten years in engineering practices. He is currently a Guest Chair Professor at the Tsinghua University, China and Adjunct Professor at the Hong Kong Polytechnic University. He is the European Editor-in-Chief for Steel & Composite Structures and serves on the editorial boards for six other international journals in structural engineering. He chairs the Working Group of the European Standard Committee, CEN/T250/SC4 responsible for the systematic review and revision of the Eurocode 4.
	Professor Richard Liew Department of Civil & Environmental Engineering National University of Singapore E1A-07-03, 1 Engineering Drive 2 Singapore 117576 Email: ceeljy@nus.edu.sg
Title:	DESIGN AND CONSTRUCTION OF COMPLEX AND USUAL STEEL STRUCTURES （复杂与超常钢结构设计）
Biography:	Richard Liew is a Professor and the Program Director of Hazard, Risk and Mitigation in the Department of Civil & Environmental Engineering at the National University of Singapore. The main focus of his research is on the development of sustainable metal-composite technologies for offshore, marine and infrastructural works. These investigations have ranged from technologies for prefabrication production of steel structures for high-rise and large span systems at one extreme to design for fire hazards and extreme loadings for structures in marine and defence related industries at the other end of the spectrum. Arising from this work, he has co-authored 5 books and generated more than 300 technical publications. He is an editorial board member of 8 journals. He interacts closely with the industry in the Asia Pacific region serving as an expert and technical advisor. He chairs numerous international and local committees related to standards and specifications of steel and composite structures. He is a registered professional engineer in Singapore, an ASEAN chartered professional engineer and a Chartered Engineer in the United Kingdom. He is a Chartered Engineer in UK, a Professional Engineer in Singapore, an ASEAN Chartered Professional Engineer, a Fellow of the Academy of Engineering Singapore, a Honorary Fellow and the Past President of Singapore Structural Steel Society and Honorary Fellow of Hong Kong Institute of Steel Construction.
	Dr. Wang Junyan Department of Material Science & Engineering Tongji University 1239, Siping Road Shanghai, China 200092 Email: 14529@tongji.edu.cn
Title:	Ultra-high performance cementitious composites: from materials properties to structural application （超高性能水泥基结构材料——从材料性能到结构应用）
Biography:	王俊颜，现任同济大学高等研究院特聘研究员、博士生导师。2010年在同济大学材料科学与工程学院获得工学博士学位，2009年赴加拿大英属哥伦比亚大学作访问学者，2010年1月至2014年12月在新加坡国立大学任项目研究员（Research Fellow）。 2014年，王俊颜博士入选同济大学基础学科高水平领航人才计划，任特聘研究员，作为负责人建设超高性能水泥基材料实验室和研究课题组。王俊颜博士的研究领域为超高性能水泥基结构材料，包括超轻、超强、超高韧性三大方向，目前已经在*Cement and Concrete Research、Cement and Concrete Composites、ACI materials journal、Construction and Building Materials*等水泥混凝土研究领域的国际顶级期刊发表十余篇SCI收录论文，并长期担任美国土木工程师学会（ASCE）、美国混凝土协会（ACI）旗下学术期刊审稿人。
	Dr. Wang Tongyun Applied Research Consultants Pte. Ltd. 1 Soon Lee Steet, #04-28 Pioneer Centre Singapore 627605 Email: wty@arcsg.com
Title:	New Trends of Applications of Advanced Numerical Analyses for Steel and Composite Structures in Singapore (新加坡钢结构及组合结构的高等分析进展)
Biography:	WANG Tongyun obtained his PhD from National University of Singapore for his works on steel-concrete interfacial behavior using cohesive zone method. Earlier he obtained Master of Engineering from NUS working on genetic algorithm and post-buckling and Bachelor of Engineering from Chongqing University. He has been working as Research Engineer and Research Fellow for more than 10 years and on over 5 jointly funded research projects including high strength steel-concrete composite columns for sustainable construction, novel steel-concrete-steel sandwich panel, CFRP composite pipe subjected to impact, multi-function facade, and ultra-high performance cementitious material for composite decking. He has one provisional US patent on SCS composite system. Dr. Wang is the co-founder of Applied Research Consultants Pte. Ltd. in Singapore and now acting as director of the company with experiences for various structural analyses, nonlinear FEA, blast effect analysis, blast-resistant design and CFD based wind study for complex roof structures. He has been appointed by Siemens Oil & Gas headquarter as FEA trainer. He has provided consulting services to many international and regional companies, including Petronas, Siemens, Emerson, Taisei, CPG, TTJ, Technics, PEC, Rotary etc. for infrastructures and Oil & Gas plants. He also served Singapore authorities including Singapore Ministry of Home Affairs and Singapore Ministry of Foreign Affairs for security related projects.
	Dr. Xiong Mingxiang Research Fellow Department of Civil and Environmental Engineering National University of Singapore Singapore 117576 Email: ceexm@nus.edu.sg
Title:	Experimental Study And Fire Resistant Design Of Concrete Filled Steel Tubular Columns With High Strength Materials （高性能钢管混凝土柱的试验研究及抗火设计）
Biography:	XIONG Mingxiang is currently a Research Fellow in National University of Singapore (NUS). He was a Research Scholar with NUS pursing his doctorate degree since 2008, and he was conferred with doctorate in 2013. He has been involved in composite structure research and design for more than 12 years. His research interests include steel-concrete composite structure subjected to static and extreme environmental loads, such as fire, impact and blast etc. He has authored/co-authored more than 10 journal papers; and the co-author for Singapore code of practice “BC4:2015 Design Guide for Concrete Filled Tubular Members with High Strength Materials - An extension of Eurocode 4 Method to C90/105 Concrete and S550 Steel”.
	Assoc. Professor Yan Jia-Bao School of Civil Engineering, Tianjin University Key Laboratory of Coastal Civil Engineering Structure and Safety Tianjin University, Tianjin 300072, China Email: ceeyanj@163.com
Title:	Novel Steel-Concrete-Steel sandwich structure – From research to applications （新型钢-砼-钢夹芯板的研究及应用）
Biography:	YAN Jia-Bao is an Associate Professor in the School of Civil Engineering at the Tianjin University, China. Before joining this University, he received his Ph.D degree from the National University of Singapore, and spent four more years to continue his research as a research fellow at the same university. His research mainly focused on the development of sustainable novel steel-concrete composite structures for civil and offshore constructions, and developing the corresponding design guidelines for the engineering application purposes by means of experiments and nonlinear numerical analysis. His extensive research interests also include the developments of high performance steel structure, steel-concrete composite structure, and reinforced concrete structure by using high performance concrete and high strength steel. He has published about forty papers in international peer reviewed journals and conferences, and has served as the reviewers for nearly ten peer reviewed journals.
	Dr. Huang Zhenyu Department of Civil & Environmental Engineering National University of Singapore E1A-02-18, 1 Engineering Drive 2 Singapore 117576 Email: zhenyu_huang@nus.edu.sg
Title:	STRUCTURAL BEHAVIOUR OF NOVEL STEEL-CONCRETE-STEEL SANDWICH COMPOSITE WALLS (新型三明治夹心墙的结构性能)
Biography:	HUANG Zhenyu is a research fellow in the Department of Civil & Environmental Engineering at the National University of Singapore. The main focus of his research is on the development of novel steel-concrete-steel sandwich composite structures infilled with ultra-lightweight cement composite for offshore, marine and infrastructural works.